Edge 800 software version 2.70 du 14/11/2013

Voir le sujet précédent Voir le sujet suivant Aller en bas

Edge 800 software version 2.70 du 14/11/2013

Message par Monique le Jeu 25 Aoû 2016 - 8:46

Edge 800 software version ici : [Vous devez être inscrit et connecté pour voir ce lien]

Tuto pour effectuer la mise à jour via WebUpdater : [Vous devez être inscrit et connecté pour voir ce lien]


Change History :

Changes made from version 2.60 to 2.70 (14/11/2013):


  • New Feature! Added VIRB Remote support.

  • Improved Vector power balance data recording and display.

  • Added message for first time setup of Vector power sensor.


  • Changes made from version 2.50 to 2.60:


  • Added Vector power sensor support.


  • Changes made from version 2.40 to 2.50:


  • Made improvements to bike profile and ANT+ sensor UI.

  • Corrected issue with all history showing 'Today'.

  • Fixed issue where clock was not updating after charging.

  • Fixed issue causing HR alerts to be shown while in desired zone.

  • Updated translations.


  • Changes made from version 2.20 to 2.40:


  • Improved training page setup and increased number of user defined training pages to 5.

  • Added a lap summary training page.

  • Increased number of bike profiles to 5.

  • Added Normalized Power (NP), Intensity Factor (IF), and Training Stress Score (TSS) data metrics.

  • Made improvements to courses.

  • Made improvements to workouts.

  • Made improvements to map drawing.

  • Fixed issues with Auto Scroll causing the device to become unresponsive.

  • Added support for left / right balance for supported power meters.


  • Changes made from version 2.10 to 2.20:


  • Added setting to turn on 1 second recording in Settings > System > Data Recording.

  • Fixed an issue that could cause large jumps in position and distance.

  • Added Last Lap Power data field.

  • Fixed an issue that was causing ANT sensors to not pair as expected.

  • Added a setting to enable a prompt to recalculate during navigation.

  • Courses are now usable with GPS turned Off and a connected ANT+ Speed sensor.

  • The Virtual Partner can now be manually synchronized by pressing and holding on the Virtual Partner graphic.

  • Fixed a speed zone field display issue.

  • Improved course navigation.

  • Fixed issues viewing an activity in progress from the history menu.

  • Fixed issue with some Mac users not being able to connect to device without resetting the timer.

  • Fixed some display issues when using a weight scale.

  • Fixed an issue that could cause distance to not accumulating after switching bike profiles while the timer is running.

  • Fixed a few issues while editing workouts and a display issue while doing a workout in night mode.

  • Fixed a display issue while doing a workout in night mode.

  • Improved elevation calibration when manually setting device elevation.


  • Changes made from version 2.00 to 2.10:


  • Improved Auto Pause behavior.

  • Corrected issues that could cause incorrect speeds to be recorded.

  • Improved auto wheel calibration especially for PowerTap power meters.

  • Added a torque reading to the calibration page for Powertap power meters.

  • Removed DeleteFiles folder.

  • Allow the device to operate in normal mode with external power.

  • Corrected issues that could corrupt activity files which would not allow them to be uploaded to Garmin Connect or Garmin Training Center.

  • Improved keyboard layout, input, and design.

  • Made improvements to the elevation profile.

  • Added an activity reset reminder.

  • Improved how the device responds when the screen has been locked.

  • Added a factory default reset in MENU -> Settings -> System -> Initial Setup.

  • Added the ability to view details for an activity that has not been reset.

  • Data fields should now report correct time and distance while navigating.

  • Corrected issues caused by removing an SD card while navigating.

  • Corrected Auto Scroll issues.

  • Corrected issues drawing the current activity on raster maps.

  • Made improvements to the Virtual Partner.

  • Added memory full warning message.

  • Corrected issue that could prevent activities from being able to be deleted.

  • Route recalculation can now be turned off in MENU -> Settings -> System -> Routing -> Recalculate.

  • Added a day/night color mode setting in MENU -> Settings -> System -> Display -> Color Mode.

  • Sensor settings will now be correctly maintained when merging FIT setting and sport files.

  • Corrected issues with weight scale data recording and communication.

  • Corrected issue that could cause lap calories to be reset after a power cycle.

  • Corrected issue that could cause workouts, courses, and locations to not be displayed in their respective lists.

  • Corrected issue that could cause data field changes on the map or elevation training pages to not be saved.

  • Lap markers in a course will now be recorded correctly while following the course.



  • [Mise à jour du post : 25/08/2016]
    avatar
    Monique
    Fondateur
    Fondateur


    Revenir en haut Aller en bas

    Voir le sujet précédent Voir le sujet suivant Revenir en haut


     
    Permission de ce forum:
    Vous ne pouvez pas répondre aux sujets dans ce forum