Edge 1000 software version 15.50 du 13/08/2020
Sorcière Monique GPS :: GPS :: Sport :: Cycle (Edge)
Page 1 sur 2
Page 1 sur 2 • 1, 2
Edge 1000 software version 15.50 du 13/08/2020
Edge 1000 software version : plutôt ICI (sur le forum US) car pas à jour LÀ (sur le site de Garmin)
Tuto pour effectuer la mise à jour via WebUpdater : [Vous devez être inscrit et connecté pour voir ce lien]
Note : Pour le Edge Explore 1000 voir : [Vous devez être inscrit et connecté pour voir ce lien]
Change History :
Changes made from version 15.40 to 15.50 (13/08/2020):
Made various device stability improvements
Changes made from version 15.30 to 15.40 (28/05/2020):
Reduced speed dropouts when connected to indoor trainers.
Fixed virtual partner issues caused by the timer being paused.
Fixed a workout naming issue.
Other minor fixes.
Changes made from version 15.20 to 15.30 (02/11/2019):
• Fixed issue where device would not connect to satellites when GLONASS is on.
Changes made from version 15.00 to 15.20 (05/06/2019):
• Fixed issue where auto-routing back to course would ignore Course Turn Guidance and Recalculation settings.
• Fixed issue causing some Connect IQ apps to not be able to make web requests through the phone connection.
• Fixed issue where stopping LiveTrack through the phone when auto-start was enabled would result in the session immediately restarting.
Changes made from version 14.80 to 15.00 (05/03/2019:
• Made improvements to course navigation, particularly in regards to navigation issues when going off course.
• Fixed issue causing MAC address to not display properly on the About page.
• Added support for 12-speed shifting sensors.
• Fixed data field issues when using a shifting system with no front derailleur.
• Fixed Connect IQ apps using Activity.info.nameOfNextPoint not working properly with course points.
• Fixed crash when returning to course.
Changes made from version 14.70 to 14.80 (26/09/2018):
• Improved device responsiveness for Varia Radar connectivity.
Changes made from version 14.60 to 14.70 (08/03/2018):
• Added Connect IQ 2.4.2 support.
• Fixed an issue that could cause the device to crash when syncing segments.
• Fixed an issue with the backlight not turning on consistently.
• Fixed an issue with the user's FTP resetting after changing the power zone configuration.
Changes made from version 14.50 to 14.60 (12/12/2017):
• Fixed Connect IQ failing after waking device from suspend mode.
Changes made from version 14.40 to 14.50 (29/11/2017):
• Added Connect IQ 2.4.1 support.
Changes made from version 14.30 to 14.40 (26/10/2017):
• Improved UI responsiveness.
• Fixed an issue preventing Connect IQ apps writing data to object stores.
• Updated the Indoor Trainer feature to reset resistance to 10% after finishing a power or resistance workout target step as long as it is not followed by another power or resistance target.
Changes made from version 14.20 to 14.30 (10/10/2017):
• Fixed configuring Shimano Di2 sensor settings.
• Improved the user interface for Vector 3 software updates.
• Fixed an issue allowing Connect IQ Apps to disable sensors.
Changes made from version 14.10 to 14.20 (29/08/2017):
• Improved the user interface for Shimano Di2 sensors.
• Improved the user interface for Vector setup.
• Fixed issues with embedded segments in courses.
• Fixed an issue that could prevent bike light networks from reforming.
Changes made from version 14.00 to 14.10 (15/06/2017):
• Fixed an issue causing the device to freeze when using Singapore maps.
Changes made from version 13.00 to 14.00 (07/06/2017):
• Added support for Connect IQ 2.3.1, which includes support for background apps, app trials, and data field trials.
• Improved bike light handling for indoor activity profiles.
Changes made from version 12.20 to 13.00 (03/05/2017):
• Added support for Varia UT lights, including a new light control page.
• Indoor cycling Activity Profiles now turn bike lights off by default.
• Improved the heading data field to show cardinal directions instead of degrees when paired to Varia Vision.
• Fixed an issue that could cause Bluetooth disconnects.
• Made improvements to Grade responsiveness and accuracy.
• Fixed an issue with routing that was incorrectly preventing some roads from being routed on and changed default avoidance of Major Highways to Off.
• Improved automatic zooming logic on the map.
Changes made from version 12.10 to 12.20 (11/04/2017):
• Fixed an issue that could keep Garmin Express map downloads from working.
Changes made from version 12.00 to 12.10 (29/03/2017):
• Fixed minor issues related to Connect IQ.
Changes made from version 11.20 to 12.00 (27/02/2017):
• New Feature! Added support for Shimano Di2 Synchronized Shift. Graphical Gear data fields will now blink, an alert tone will be played, and a message banner will be displayed to indicate a chain ring shift is upcoming. Synchronized Shift mode can be changed and the alert tones can be disabled through the Shimano Di2 sensor settings.
• Added improvements for ANT+ bike lights. Added new Light Beam Activated and network Light Mode settings to ANT+ Bike Lights sensor settings. You can now configure your lights to turn On with a Timer Start by using the new Light Beam Activated setting and there is also a new Trail Light Mode.
• Added support for Connect IQ version 2.2.3.
• Fixed power zone settings not being retained.
• Fixed shutdowns during navigation.
• Fixed route calculation on special maps.
Changes made from version 11.10 to 11.20 (15/12/2016):
• Improvements to Workout Data Screen.
• Fixed a bug to properly set target power when using the indoor trainer.
Changes made from version 10.00 to 11.10 (07/11/2016):
• New feature! Connect IQ 2.2 Support: Connect IQ Apps, Widgets and Data Fields can now communicate with ANT+ Power Meters and Bike Lights that are already connected to your Edge and can also now take advantage of ANT Burst mode. In addition, Apps and Widgets can take advantage of downloadable content and the new Intents system to create new and innovative experiences.
• New feature! Time in Zone data fields for Heart Rate and Power.
• Fixed an issue with the Turn Guidance Popup where the Map was not centering on the turn.
Changes made from version 9.20 to 10.00 (13/10/2016):
• New feature! Added support for LiveTrack Auto Start.
• New feature! Added support for GroupTrack.
• Added Distance and Time Ahead/Behind as configurable data fields.
• Added Bike Lights options to Shimano Di2 remote controls. Now you can control ANT+ Bike Lights remotely with your Shimano Di2 Dura Ace shifters!
Changes made from version 9.10 to 9.20 (07/09/2016):
• Fixed several issues and made improvements for Varia Vision.
• Fixed several issues and made improvements for Connect IQ.
• Fixed an issue uploading activities over Wi-Fi.
• Made improvements to the software update page.
• Added mixed surface ride type.
Changes made from version 9.00 to 9.10 (15/08/2016):
• Fixed an issue with syncing Connect IQ settings.
• Fixed issue where activities using Connect IQ data fields could be corrupted.
• We apologize for the inconvenience, but this update will require you to pair your Edge and phone after the update.
Tuto pour effectuer la mise à jour via WebUpdater : [Vous devez être inscrit et connecté pour voir ce lien]
Note : Pour le Edge Explore 1000 voir : [Vous devez être inscrit et connecté pour voir ce lien]
Change History :
Changes made from version 15.40 to 15.50 (13/08/2020):
Made various device stability improvements
Changes made from version 15.30 to 15.40 (28/05/2020):
Reduced speed dropouts when connected to indoor trainers.
Fixed virtual partner issues caused by the timer being paused.
Fixed a workout naming issue.
Other minor fixes.
Changes made from version 15.20 to 15.30 (02/11/2019):
• Fixed issue where device would not connect to satellites when GLONASS is on.
Changes made from version 15.00 to 15.20 (05/06/2019):
• Fixed issue where auto-routing back to course would ignore Course Turn Guidance and Recalculation settings.
• Fixed issue causing some Connect IQ apps to not be able to make web requests through the phone connection.
• Fixed issue where stopping LiveTrack through the phone when auto-start was enabled would result in the session immediately restarting.
Changes made from version 14.80 to 15.00 (05/03/2019:
• Made improvements to course navigation, particularly in regards to navigation issues when going off course.
• Fixed issue causing MAC address to not display properly on the About page.
• Added support for 12-speed shifting sensors.
• Fixed data field issues when using a shifting system with no front derailleur.
• Fixed Connect IQ apps using Activity.info.nameOfNextPoint not working properly with course points.
• Fixed crash when returning to course.
Changes made from version 14.70 to 14.80 (26/09/2018):
• Improved device responsiveness for Varia Radar connectivity.
Changes made from version 14.60 to 14.70 (08/03/2018):
• Added Connect IQ 2.4.2 support.
• Fixed an issue that could cause the device to crash when syncing segments.
• Fixed an issue with the backlight not turning on consistently.
• Fixed an issue with the user's FTP resetting after changing the power zone configuration.
Changes made from version 14.50 to 14.60 (12/12/2017):
• Fixed Connect IQ failing after waking device from suspend mode.
Changes made from version 14.40 to 14.50 (29/11/2017):
• Added Connect IQ 2.4.1 support.
Changes made from version 14.30 to 14.40 (26/10/2017):
• Improved UI responsiveness.
• Fixed an issue preventing Connect IQ apps writing data to object stores.
• Updated the Indoor Trainer feature to reset resistance to 10% after finishing a power or resistance workout target step as long as it is not followed by another power or resistance target.
Changes made from version 14.20 to 14.30 (10/10/2017):
• Fixed configuring Shimano Di2 sensor settings.
• Improved the user interface for Vector 3 software updates.
• Fixed an issue allowing Connect IQ Apps to disable sensors.
Changes made from version 14.10 to 14.20 (29/08/2017):
• Improved the user interface for Shimano Di2 sensors.
• Improved the user interface for Vector setup.
• Fixed issues with embedded segments in courses.
• Fixed an issue that could prevent bike light networks from reforming.
Changes made from version 14.00 to 14.10 (15/06/2017):
• Fixed an issue causing the device to freeze when using Singapore maps.
Changes made from version 13.00 to 14.00 (07/06/2017):
• Added support for Connect IQ 2.3.1, which includes support for background apps, app trials, and data field trials.
• Improved bike light handling for indoor activity profiles.
Changes made from version 12.20 to 13.00 (03/05/2017):
• Added support for Varia UT lights, including a new light control page.
• Indoor cycling Activity Profiles now turn bike lights off by default.
• Improved the heading data field to show cardinal directions instead of degrees when paired to Varia Vision.
• Fixed an issue that could cause Bluetooth disconnects.
• Made improvements to Grade responsiveness and accuracy.
• Fixed an issue with routing that was incorrectly preventing some roads from being routed on and changed default avoidance of Major Highways to Off.
• Improved automatic zooming logic on the map.
Changes made from version 12.10 to 12.20 (11/04/2017):
• Fixed an issue that could keep Garmin Express map downloads from working.
Changes made from version 12.00 to 12.10 (29/03/2017):
• Fixed minor issues related to Connect IQ.
Changes made from version 11.20 to 12.00 (27/02/2017):
• New Feature! Added support for Shimano Di2 Synchronized Shift. Graphical Gear data fields will now blink, an alert tone will be played, and a message banner will be displayed to indicate a chain ring shift is upcoming. Synchronized Shift mode can be changed and the alert tones can be disabled through the Shimano Di2 sensor settings.
• Added improvements for ANT+ bike lights. Added new Light Beam Activated and network Light Mode settings to ANT+ Bike Lights sensor settings. You can now configure your lights to turn On with a Timer Start by using the new Light Beam Activated setting and there is also a new Trail Light Mode.
• Added support for Connect IQ version 2.2.3.
• Fixed power zone settings not being retained.
• Fixed shutdowns during navigation.
• Fixed route calculation on special maps.
Changes made from version 11.10 to 11.20 (15/12/2016):
• Improvements to Workout Data Screen.
• Fixed a bug to properly set target power when using the indoor trainer.
Changes made from version 10.00 to 11.10 (07/11/2016):
• New feature! Connect IQ 2.2 Support: Connect IQ Apps, Widgets and Data Fields can now communicate with ANT+ Power Meters and Bike Lights that are already connected to your Edge and can also now take advantage of ANT Burst mode. In addition, Apps and Widgets can take advantage of downloadable content and the new Intents system to create new and innovative experiences.
• New feature! Time in Zone data fields for Heart Rate and Power.
• Fixed an issue with the Turn Guidance Popup where the Map was not centering on the turn.
Changes made from version 9.20 to 10.00 (13/10/2016):
• New feature! Added support for LiveTrack Auto Start.
• New feature! Added support for GroupTrack.
• Added Distance and Time Ahead/Behind as configurable data fields.
• Added Bike Lights options to Shimano Di2 remote controls. Now you can control ANT+ Bike Lights remotely with your Shimano Di2 Dura Ace shifters!
Changes made from version 9.10 to 9.20 (07/09/2016):
• Fixed several issues and made improvements for Varia Vision.
• Fixed several issues and made improvements for Connect IQ.
• Fixed an issue uploading activities over Wi-Fi.
• Made improvements to the software update page.
• Added mixed surface ride type.
Changes made from version 9.00 to 9.10 (15/08/2016):
• Fixed an issue with syncing Connect IQ settings.
• Fixed issue where activities using Connect IQ data fields could be corrupted.
• We apologize for the inconvenience, but this update will require you to pair your Edge and phone after the update.
Dernière édition par Monique le Mer 18 Nov 2020 - 9:17, édité 29 fois
Monique- Fondatrice
Re: Edge 1000 software version 15.50 du 13/08/2020
Version 10.0 depuis le 13/10
[EDIT de Monique : Merci, post 1 mis à jour]
[EDIT de Monique : Merci, post 1 mis à jour]
squash- 1 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Version 11.10 depuis le 09/11
.
Changes made from version 10.00 to 11.10:
New feature! Connect IQ 2.2 Support: Connect IQ Apps, Widgets and Data Fields can now communicate with ANT+ Power Meters and Bike Lights that are already connected to your Edge and can also now take advantage of ANT Burst mode. In addition, Apps and Widgets can take advantage of downloadable content and the new Intents system to create new and innovative experiences.
New feature! Time in Zone data fields for Heart Rate and Power.
Fixed an issue with the Turn Guidance Popup where the Map was not centering on the turn.
[EDIT de Monique : Merci, post 1 mis à jour]
.
Changes made from version 10.00 to 11.10:
New feature! Connect IQ 2.2 Support: Connect IQ Apps, Widgets and Data Fields can now communicate with ANT+ Power Meters and Bike Lights that are already connected to your Edge and can also now take advantage of ANT Burst mode. In addition, Apps and Widgets can take advantage of downloadable content and the new Intents system to create new and innovative experiences.
New feature! Time in Zone data fields for Heart Rate and Power.
Fixed an issue with the Turn Guidance Popup where the Map was not centering on the turn.
[EDIT de Monique : Merci, post 1 mis à jour]
squash- 1 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
V 11.20 disponible
Changes made from version 11.10 to 11.20:
Improvements to Workout Data Screen.
Fixed a bug to properly set target power when using the indoor trainer.
[EDIT de Monique : Merci, post 1 mis à jour]
Changes made from version 11.10 to 11.20:
Improvements to Workout Data Screen.
Fixed a bug to properly set target power when using the indoor trainer.
[EDIT de Monique : Merci, post 1 mis à jour]
squash- 1 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Passage ce jour à la version 12.00
Cordialement.
[EDIT de Monique : Merci. Post 1 mis à jour]
Passage ce jour à la version 12.00
Cordialement.
[EDIT de Monique : Merci. Post 1 mis à jour]
michle38- 6 sat
Guidage/flèchage Edge 1000
Guidage avec l'Edge 1000.
Selon les mises à jour....
Les informations de guidage, apparaissent, automatiquement, avant un changement de direction,
Où, n'apparaissent jamais?....
Ce qui est le cas depuis la mise à jour 12.0.
Quelqu'un l'a t'il constaté, ou trouvé le paramètre nécessaire?....
Selon les mises à jour....
Les informations de guidage, apparaissent, automatiquement, avant un changement de direction,
Où, n'apparaissent jamais?....
Ce qui est le cas depuis la mise à jour 12.0.
Quelqu'un l'a t'il constaté, ou trouvé le paramètre nécessaire?....
Dernière édition par LIGONNIERE le Dim 12 Mar 2017 - 13:54, édité 1 fois
LIGONNIERE- 1 sat
Guidage/flèchage Edge 1000
J'ai peut-être trouvé, (sur forum, utagawavtt.com)
Je teste demain:
"options de parcours", activer "informations détaillées"...
C'est peut-être ça!...
je confirme demain.
(le lendemain...)
C'est bien cela, "options de parcours", activer "informations détaillées"...ça marche,
Mais pourquoi, cela variait-il, après une mise à jour?
ça fait deux ans que je cherche... (quand, ça ne marchait plus),
Je teste demain:
"options de parcours", activer "informations détaillées"...
C'est peut-être ça!...
je confirme demain.
(le lendemain...)
C'est bien cela, "options de parcours", activer "informations détaillées"...ça marche,
Mais pourquoi, cela variait-il, après une mise à jour?
ça fait deux ans que je cherche... (quand, ça ne marchait plus),
LIGONNIERE- 1 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Version actuelle 12.10
Changes made from version 12.00 to 12.10:
• Fixed minor issues related to Connect IQ.
Pour la carte cycle map EU, j'ai toujours 2016.20. Est-ce normal ?
Cordialement.
Version actuelle 12.10
Changes made from version 12.00 to 12.10:
• Fixed minor issues related to Connect IQ.
Pour la carte cycle map EU, j'ai toujours 2016.20. Est-ce normal ?
Cordialement.
michle38- 6 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Merci, j'ai mis le post 1 à jour.
Pour la carte cycle map EU, je ne connais pas le nom/la date de la dernière version.
Normalement, elle se met à jour avec Garmin Express. Il faudrait essayer avec la dernière version (5.3.1) de Garmin Express.
Si cela ne fonctionne pas, j'espère qu'un utilisateur de Edge pourra te répondre.
Merci, j'ai mis le post 1 à jour.
Pour la carte cycle map EU, je ne connais pas le nom/la date de la dernière version.

Si cela ne fonctionne pas, j'espère qu'un utilisateur de Edge pourra te répondre.
Monique- Fondatrice
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Passage à la version 12.20
Cordialement.
[EDIT de Monique : Merci, post 1 mis à jour]
Passage à la version 12.20
Changes made from version 12.10 to 12.20:
- Fixed an issue that could keep Garmin Express map downloads from working.
Cordialement.
[EDIT de Monique : Merci, post 1 mis à jour]
michle38- 6 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Nouvelle version edge 1000 13.00
Changes made from version 12.20 to 13.00:
[EDIT de Monique : Merci, post 1 mis à jour]
Nouvelle version edge 1000 13.00
Changes made from version 12.20 to 13.00:
- Added support for Varia UT lights, including a new light control page.
- Indoor cycling Activity Profiles now turn bike lights off by default
- Improved the heading data field to show cardinal directions instead of degrees when paired to Varia Vision.
- Fixed an issue that could cause Bluetooth disconnects.•Made improvements to Grade responsiveness and accuracy
- Fixed an issue with routing that was incorrectly preventing some roads from being routed on and changed default avoidance of Major Highways to Off
- Improved automatic zooming logic on the map.
[EDIT de Monique : Merci, post 1 mis à jour]
michle38- 6 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Nouvelle version EDGE 1000 14.00
Changes made from version 13.00 to 14.00:
[EDIT de Monique : Merci, post 1 mis à jour]
Nouvelle version EDGE 1000 14.00
Changes made from version 13.00 to 14.00:
- Added support for Connect IQ 2.3.1, which includes support for background apps, app trials, and data field trials.
- Improved bike light handling for indoor activity profiles.
[EDIT de Monique : Merci, post 1 mis à jour]
michle38- 6 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Changes made from version 14.00 to 14.10:
Fixed an issue causing the device to freeze when using Singapore maps.
[EDIT de Monique : Merci, post 1 mis à jour]
Fixed an issue causing the device to freeze when using Singapore maps.
[EDIT de Monique : Merci, post 1 mis à jour]
squash- 1 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Change History
Changes made from version 14.10 to 14.20:
•Improved the user interface for Shimano Di2 sensors.
•Improved the user interface for Vector setup.
•Fixed issues with embedded segments in courses.
•Fixed an issue that could prevent bike light networks from reforming.
[EDIT de Monique : Merci, post 1 mis à jour]
Change History
Changes made from version 14.10 to 14.20:
•Improved the user interface for Shimano Di2 sensors.
•Improved the user interface for Vector setup.
•Fixed issues with embedded segments in courses.
•Fixed an issue that could prevent bike light networks from reforming.
[EDIT de Monique : Merci, post 1 mis à jour]
michle38- 6 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Edge 1000 software version 14.30 (10/10/17)
Changes made from version 14.20 to 14.30:
•Fixed configuring Shimano Di2 sensor settings.
•Improved the user interface for Vector 3 software updates.
•Fixed an issue allowing Connect IQ Apps to disable sensors.
[EDIT de Monique : Merci, post 1 mis à jour]
Edge 1000 software version 14.30 (10/10/17)
Changes made from version 14.20 to 14.30:
•Fixed configuring Shimano Di2 sensor settings.
•Improved the user interface for Vector 3 software updates.
•Fixed an issue allowing Connect IQ Apps to disable sensors.
[EDIT de Monique : Merci, post 1 mis à jour]
michle38- 6 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Edge 1000 software version 14.50 du 29/11/2017
Changes made from version 14.40 to 14.50:
•Added Connect IQ 2.4.1 support.
[EDIT de Monique : Merci, post 1 mis à jour]
Edge 1000 software version 14.50 du 29/11/2017
Changes made from version 14.40 to 14.50:
•Added Connect IQ 2.4.1 support.
[EDIT de Monique : Merci, post 1 mis à jour]
michle38- 6 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour Michel,
Merci. C'est la même chose que pour la version 3.70 du Edge 1030 (du 12/12/2017 également) et pour d'autres Edge, notes de versions trouvées sur le forum Garmin US.Elle n'apparait pas sur le site de Garmin dans l'historique des MAJ.......
Monique- Fondatrice
Re: Edge 1000 software version 15.50 du 13/08/2020
Depuis que j'ai mis à jour le garmin edge 1000 vers la version 14.60 je n'arrive plus à transférer mes activités du garmin vers Training center.
D'autre part contrairement à beaucoup d'utilisateurs, j'apprécie training center (très simple d'utilisation) et je le préfère à garmin express.
D'autre part contrairement à beaucoup d'utilisateurs, j'apprécie training center (très simple d'utilisation) et je le préfère à garmin express.
Dernière édition par zephir le Lun 5 Fév 2018 - 16:53, édité 1 fois
zephir- 3 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
J'ai trouvé la raison.
La version 14.60 a réinitialisé toutes mes données.
Mes activités sont enregistrées par défaut sur la sdcard du garmin edge 1000.
D'où ma nouvelle question :
Comment enregistrer par défaut les activités sur l'appareil et non la sdcard ?
EDIT (si quelqu'un d'autre rencontre le même problème).
Il faut aller dans les réglages du garmin
Système
Enregistrement des données
Enregistrer vers stockage interne.
La version 14.60 a réinitialisé toutes mes données.
Mes activités sont enregistrées par défaut sur la sdcard du garmin edge 1000.
D'où ma nouvelle question :
Comment enregistrer par défaut les activités sur l'appareil et non la sdcard ?
EDIT (si quelqu'un d'autre rencontre le même problème).
Il faut aller dans les réglages du garmin
Système
Enregistrement des données
Enregistrer vers stockage interne.
zephir- 3 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Bonjour,
Sur le GPS, dans Paramères / système / Enregistrement des données / enregistrer Vers
Sur le GPS, dans Paramères / système / Enregistrement des données / enregistrer Vers
michle38- 6 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Merci Michle38 pour ta réponse rapide.
C'était bien ça.
C'était bien ça.
zephir- 3 sat
Re: Edge 1000 software version 15.50 du 13/08/2020
Changes made from version 14.60 to 14.70:
•Added Connect IQ 2.4.2 support.
•Fixed an issue that could cause the device to crash when syncing segments.
•Fixed an issue with the backlight not turning on consistently.
•Fixed an issue with the user's FTP resetting after changing the power zone configuration.
[EDIT de Monique : Merci, post 1 mis à jour]
•Added Connect IQ 2.4.2 support.
•Fixed an issue that could cause the device to crash when syncing segments.
•Fixed an issue with the backlight not turning on consistently.
•Fixed an issue with the user's FTP resetting after changing the power zone configuration.
[EDIT de Monique : Merci, post 1 mis à jour]
michle38- 6 sat
Edge 1000 software version 14.80 du 26/9/2018
Changes made from version 14.70 to 14.80:
•Improved device responsiveness for Varia Radar connectivity.
[EDIT de Monique : Merci, post 1 mis à jour]
•Improved device responsiveness for Varia Radar connectivity.
[EDIT de Monique : Merci, post 1 mis à jour]
michle38- 6 sat
Page 1 sur 2 • 1, 2
Sorcière Monique GPS :: GPS :: Sport :: Cycle (Edge)
Page 1 sur 2
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum